CNC USB MACH3 100Khz Breakout Board 4 Axis Interface Drive Motion Controller + 4pcs TB6600 Nema 23 Nema34 Stepper Motor Driver

CNC USB MACH3 100Khz Breakout Board 4 Axis Interface Drive Motion Controller + 4pcs TB6600 Nema 23 Nema34 Stepper Motor Driver

Description for 100Khz Breakout Board

1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;

2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;

3. Support automatic probe tool

4. Support Emergency input

5. Support for limit switch

6. Support for connecting electronic handwheel

7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable

8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed.

9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device

10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device

11. 1 status LED, indicate connection status on the board

Size: 8x7.7cm/3.15x3.03inch

Quantity: 1 Set

Note:

Please allow 1-3mm error due to manual
measurement. pls make sure you do not mind before you bid.

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

TB6600 Stepper Motor Driver

Parameters

1. 9V-42V DC power supply;

2. H-bridge bipolar constant-phase current drive;

3. Eight output currents up to 4.0A are optional;

4. 6 kinds of subdivision modes of big 32 subdivision are optional;

5. High-speed photoelectric isolation of input signals;

6. Standard common anode single pulse interface;

7. Offline hold function;

8. The semi-enclosed casing can adapt to more severe environments;

9. Provide energy-saving semi-automatic current locking function;

10. Built-in temperature protection and over current protection.

Note:

1. we have a large inventory, can be shipped out the next day ~

2. original quality.

3. Packed with PE Foam, can protect the motor very well during the transportion.

Package Contents:

4 x TB6600

1 x USB CNC Controller Card

1 x USB cable

1 x CD –(if not get, please contact us. We will send you download link)