Max 20W 30W 50W Q-switched Pulse Fiber Laser Marking Machine Source GQM 1064nm for DIY Metal Engraving Tool

Max 20W 30W 50W Q-switched Pulse Fiber Laser Marking Machine Source GQM 1064nm for DIY Metal Engraving Tool

Quality:

Model:20W>20L>20X

Model:30W>30L>30X

Model:50W>50X

Customer can choose suitable model to buy based your general budget.

Features:

1.High reliability: All optical fiber, no space optics,

2.Fine marking:The beam quality is good, the pulse width is small, and the marking pattern is more delicate.

3.Easy to integrate:The volume is reduced by 67%, and the weight is reduced by 50%, making it easier to integrate equipment.

4.Intelligent control:The built-in cooling fan can intelligently adjust the wind speed, which is convenient for energy saving.

5.Sealed structure: Fully sealed structure is used to prevent dust and moisture, ensuring long-term operation of the machine.

Q-Switched Pulsed Fiber Laser Series are maintenance-free fiber lasers based on the Q-switched technology and MOPFA. These lasers deliver light centered at 1064nm and guided to the work piece via a flexible metal-sheathed fiber cable. It provides a set of pulse durations, repetition rates and peak powers. The optical head may be equipped with an opto-isolator, that makes it possible to mark directly on non-metallic materials (plastic, wood, paper, etc.) and some metal with low reflectivity.

• High beam quality fiber output.

• Superior reliability, long lifetime.

• No shadow or virtual open circuit phenomenon when processing on special materials.

• Universal DB-25 interface.

Technical Parameters

NO.	Characteristics	Test Conditions	Min.	Typical	Max.	Unit
1	Mode	Pulse
2	Polarization	Random
3	Beam Quality M⊃2;	Pout=Pnom	1.1	1.3	1.6
4	Center Wavelength	Pout=Pnom	1055	1064	1070	nm
5	Spectrum Width(3dB)	Pout=Pnom		5	10	nm
6	Average Optical Power(Pnom)	MFP-5W	4.5	5	5.5	W
		MFP-10W	9.5	10	10.5	W
		MFP-20W	19.5	20	20.5	W
		MFP-30W	29.5	30	30.5	W
		MFP-50W	49	50	51	W
7	Power	Range	10		100	%
8	Single Pules Energy	MFP-5W		0.45		mJ
		MFP-10W		0.56		mJ
		MFP-20W		0.67		mJ
		MFP-30W		1		mJ
		MFP-50W		1		mJ
9	Optical Pulse Width(FWHM)		90	100	110	ns
10	Pulse Repetition Frequency (PRF.)	MFP-5W	10		30	KHz
		MFP-10W	22		50	KHz
		MFP-20W	30		60	KHz
		MFP-30W	30		60	KHz
		MFP-50W	50		80	KHz
11	Output Power Stability	Pout=Pnom			5	%
12	Beam Diameter	1/e2	6	7.5	9	mm
13	Beam Ellipticity				90	%
Brand Name OEMG Certification CE;CE Model Max 20W 30W 50W Q-switched Pulse Fiber Laser Source Model Number Max 20W 30W 50W Q-switched Pulse Fiber Laser Source operating syste EZCAD2 Origin Mainland China Write a review Your Name Your Review Note: HTML is not translated! Rating Bad Good Enter the code in the box below Submit Tags: Max 20W 30W 50W Q-switched Pulse Fiber Laser Marking Machine, Source GQM 1064nm for DIY Metal Engraving Tool